Automatic Spot Welding 18650 Cells Single Side Spot Welding Machine
Product Description
Rotary welding head welding needle need to configure 5000A / 8000A spot welding machine.
Electric operate model: do not need to connect another air compressor.
Rotary welding head welding needle and ordinary welding head can not be universal.
Device Features: (The following parameters can be non-standard custom)
A) Compatibility of battery packs of different sizes:
Adjust the size of the battery module by positioning the side panels. Maximum welding area 400 * 400 (customized as required).
B) Mold positioning:
Use the upper and lower sides of the motor clamping adjustment, the top side with positioning pin positioning to ensure that the mold can be accurately positioned.
It will not influence welding function because of the large area.
C) Rotation of the welding head:
The welding head can be rotated automatically within 180 ° to meet the different angles of the solder joints (through programming control).
D) welding compression action using servo motor to achieve.It ensure that the welding head and the workpiece pressure uniform, welding stability.
E) welding needle automatic grinding: Can be set to automatically polish the frequency and the number of grinding in the welding needle after a period of time to ensure the welding quality..
F) Automatic compensation of welding needle: Can be set to automatically compensate for welding soldering work after a period of time to ensure that the strength of the same solder pin and the welding quality.
G) Poor welding machine warming and handling: In case of poor welding, the touch screen automatically alerts, and the alarm data stored in the internal form for inspection.
(H) A.UI device user interface user-friendly, easy to learn. 10 minutes church operator, half hour church programming operation.
Product Features
1. Power:4KW,AC 220V,50HZ
2. Air pressure; 0.4-0.6Mpa
3. Applied range: Series and parallel combination of 18650, 26650, 32650 and square batteries(or similar), to achieve automated single-sided spot welding.
4. Suitable nickel width: unlimited
5. Suitable nickel thickness: 0.1mm-0.3mm
6. Take the 18650 battery as an example, 1800-2000pcs per hour
7. Welding effect: good welding consistency, uniform solder joints and beautiful
8. Control component: 7-inch touch screen, 3-axis high speed PLC programmer, 2-axis 750W servo and stepper motor.
9. Uses forming nickel strip to reduce waste.
10. Equipment debugging is simple, easy to learn and easy to understand, change the model quickly
11. Spot welding effective area: X-axis 400mm, Y-axis 400mm
12. Welding head power: by servo motor
13. Finished battery fixture mold: 1 set insulation electric wood fixture(2 pcs)
14. The device comes with a fault alarm,clear the fault according to the prompt
15. The device can store 99 sets of programming data, easy to use in production.
16. Welding machine:5000A / 8000A model, one set.
Product Advantages
1. Touch screen display, more convenient operation and clearer display
2. Three file programming modes, manual input, array, CAD DXF drawing import, simple and fast response to various complex program editing
3. The welding head has the function of air cooling or water cooling, which can effectively reduce the influence of spot welding needle temperature on welding quality
4. It can store up to 99 groups of files, which is easy to call and does not need complicated process of line changing and machine adjusting
5. The spot welding program of a side and B side of fixture can be switched.
Product Specification
| Model No. |
MD-ASW |
| Y-axis travel |
400mm (customizable) |
| X-axis travel |
400mm (customizable) |
| Max spot welding speed |
0.35s/point (1 hour:about 2800 units18650 cells) |
| Motor drive speed |
1000mm/S |
| Rotation Angle |
180° |
| Max load electric cores |
X direction: 26; Y direction: 26 |
| Capable file group storage |
100 groups |
| Operating system |
embedded system human-machine interface |
| Transmission mode |
Taiwan precision screw with guide rail |
| Driving mode |
stepper servo motor |
| Repeat positioning accuracy |
±0.02mm |
| Dimensions |
L: 900mm, W: 900mm, H: 1750mm |
| Power |
4000W |
| Machine weight |
200KG |
| Max bearing weight of Y-axis |
35KG |
| Input power supply |
single-phase AC 220V/50Hz, 3-phase AC 380V |
| Air Source |
0.4-0.6 Mpa |
Product Application
It is suitable for electric vehicle battery pack, automobile battery module, street lamp battery, balance car battery pack, scooter battery pack, mobile power supply, startup battery pack module, power tool battery pack, notebook battery pack, etc!
Product Operation
1. Setting the parameters of welding on the touch screen. (The same product only need to be set once)
2. Put the fixture with the battery pack on the quick clamping position.
3. Press the start button, the machine automatically complete all welding actions.
4. The welder sound to prompt operator replacement of new fixture (battery pack).
Product Tags:
|
|
Single Side Spot Battery Pack Welding Machine 18650 Cells 4000W Power Images
|
